COATESIA Zinc Chromate Primer is an alkyd based metal primer intended for maintenance applications. It contains rust inhibitive pigments which protect the metal surface from corrosion in mild to moderately corrosive atmosphere.
Stir well before use
Brush & spray gun
15-20% by volume if required
Surface Dry in 1-2 hours
Coatesia Knifing Paste Filler Grey I
Temperature10-40 degree celcius. Humidity below 70%
Clean the surface of loose paint, dust and grease. Wipe clean using turpentine and allow to dry.
Sand the surface with emery paper 180 and wipe clean
Apply one coat Coatesia Yellow Zinc Chrome Primer. Allow to dry
overnight. Any undulation on the surface can be filled using
Coatesia Knifing Paste filler grey. Allow to dry and apply one coat of
Coatesia Yellow Zinc chrome primer over the filler Spray application: Air-assisted
spray application at pressure 25 -
30 psi.
Recoat period is quoted for 25° C
and 50% Relative Humidity; these
may vary under different
conditions.
| Coverage | 1 Coat: 7-10 sqm/L** |
|---|---|
| Drying Time | 12 Hours (Overnight) |
| Sheen Level | NA |
| Thinning | 10–20% by volume using Coatesia Thinner |
| Flash Point | Not below 30°C |
| Stability of thinned paint | 24 Hrs |
| Appearance | Liquid |
| Solids | 55-60% |
| Specific gravity | 1.3 to 1/4 |
| VOC Content | Max 450 g/L (As per EPA Method 24) |
| Recommended DFT | 30 - 50 Microns |
| Viscosity | 90-100 secs @ 30°C by Ford Cup |
| Shelf life | 12 Months |
| Contrast ratio | NA |
Do not overthin.
To be overcoated with conventional
alkyd enamels
20 L(As per requirement of client)