Coatesia Red Oxide Primer is a General Purpose Metal Primer based on Synthetic Resin medium and Red Oxide of Iron which acts as an anticorrosive pigment. Suitable for all condition.
Coatesia Red Oxide Primer is a general purpose metal primer based on synthetic resin medium and red oxide of iron, acting as an anticorrosive pigment. Suitable for all service conditions.
Recommended for application on iron and steel surfaces.
Ensure surface is clean, dry and free from rust, grease, wax or dirt.
Remove mill scale, rust and loose material using abrasive paper or wire brush.
Apply 1–2 coats of Coatesia Red Oxide Metal Primer before top coats.
Grey Knifing Paste Filler (Air Drying / Stoving) – Refer datasheet.
Stoving: Flash-off 30 min → 30 min at 100°C.
Air Dry: 8 hrs (dry scuff), 16–18 hrs (wet scuff).
High-performance protective coating for industrial metal surfaces
Ideal for application on iron and steel structures including industrial equipment, machinery, pipelines, and fabricated components.
| Coverage | 150 – 170 sq.ft / liter / coat |
|---|---|
| Drying Time | Surface Dry: Max 1 hour |
| Gloss Level | Matt |
| Overcoating | 8–10 hrs (Air Dry), 30 mins at 120°C (Stoving) |
| Thinning | 10–20% by volume using Coatesia Thinner |
| Flash Point | Not below 30°C |
Flammable. Store in a cool, well-ventilated area away from ignition sources.
200 ml, 500 ml, 1 L, 4 L, 10 L, 20 L