Icon

SOLVENT BASED FIRE RETARDANT PAINT

(Originally Known as COATESIA INDUSTRIES PVT.LTD). consists of a non-flammable resin, special fire retardant Chemicals and fire retardant additives unlike normal paints which are based on flammable raw material. The dried film gives protection against spread of fire on mild steel up to 2 hours. Certified by the best testing labs

Recommended Usage

This product can be used on wood, metal and concrete surfaces.
This Product has a varied application in industrial & commercial establishments

Application Details & Surface Preparation

Finish

Smooth , High Gloss to Matt

Shelf Life

1 Year (If kept in original and Individual sealed containers) (Stir well with electric stirrer before use)

Viscosity

Thixotropic

Theoretical Coverage

1.7 to 2.2 sq. mtr. /liter per coat @200-250 microns DFT for finish paint.

Drying Time

Surface Dry: 30 Min
Hard Dry: Overnight

Over coating intervals

8-10 Hours minimum @ 30°C

Solvent Based Fire Retardant Paint

Certified fire protection coating for steel, wood & concrete surfaces

Application Details

Application Method:
Brush, Airless Spray

Thinner:
Coatesia Fire Retardant Thinner. Add 5–15% thinner for proper brushing. Over-thinning may require more coats to achieve desired DFT.

Surface Preparation:

  • Remove oil, grease, dirt and other impurities
  • Ensure surface is free from old paint or coatings
  • Sand blasting recommended for metal surfaces
  • Ensure wood and concrete surfaces are properly treated
Painting System

For M.S Substrates: Apply Coatesia Epoxy Primer or Coatesia Fire Retardant Primer followed by maximum coats of Solvent Based Fire Retardant Paint to achieve the required DFT.

Recommended DFT
  • Fire Retardant Primer: 100–150 microns
  • Fire Retardant Paint: 300–500 microns & above

Note: Properties may vary depending on colour range.

Precautions
  • Do not apply below -10°C or above 60°C
  • Do not apply when humidity exceeds 80%
  • Do not apply during rain, fog or mist
  • Flammable liquid – keep away from heat and open flames
  • Causes serious eye damage and skin irritation
  • May cause allergic skin reaction
  • Toxic to aquatic life – avoid release into environment
  • Wear protective gloves and eye/face protection
  • Avoid breathing vapours
  • Ensure proper ventilation during application and drying
  • Store in a cool, well-ventilated place
  • Keep out of reach of children
Disclaimer

The data provided is based on tests carried out at the time of preparation. The user must conduct necessary tests to confirm product suitability. No responsibility is accepted for results due to storage, handling or application conditions beyond our control. For shade consistency, ensure same batch numbers are used on site.

Available Pack Sizes

4 Ltr | 20 Ltr (As per client requirement)

Primer Certificate Enamel Certificate